Cobalt L4-2.0L SC VIN P (2005)
9. Install the clutch drive plate bolt.
IMPORTANT: Make certain that the new drive plate bolt has colored adhesive on at least 5 threads.
10. NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the compressor clutch drive plate bolt.Use the J 37872 to hold the compressor clutch plate from turning.
Tighten the bolt to 12 N.m (9 lb ft).
11. Install the compressor.
12. Leak test the fittings using the J 39400-A.
