Cobalt L4-2.0L SC VIN P (2005)
1.
Route the compressor hose to the evaporator hose.
2.
Install new sealing washers on the compressor and condenser hose fittings.
3.
Install the A/C compressor and condenser hose assembly to the compressor.
Note:
Refer to Fastener Notice in Cautions and Notices.
4.
Install the A/C compressor and condenser hose assembly bolt.
Tighten the bolt to 20 N.m (15 lb ft).
5.
Install a new seal washer to the compressor hose.
6.
Install the compressor hose and bolt to the condenser.
Tighten the bolt to 20 N.m (15 lb ft).