Cobalt L4-2.0L SC VIN P (2005)
Hose/Line HVAC: Service and Repair
Compressor Hose Assembly
The content of this article/image reflects the changes identified in TSB
Bulletin No.: 06-01-37-003
Date: March 17, 2006
SERVICE MANUAL UPDATE
Subject:
Revised Compressor Hose Assembly Replacement (RPO LSJ)
Models:
2005-2006 Chevrolet Cobalt
with 2.0L Engine (VIN P - RPO LSJ)
Compressor Hose Assembly Replacement
Tools Required
J 39400-A Halogen Leak Detector
Removal Procedure
1.
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2.
Remove the compressor hose from the evaporator hose.
3.
Remove and discard the seal washer.
4.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
5.
Remove the mounting cover from the charge air cooler pump and position the pump forward.
