Cobalt L4-2.0L SC VIN P (2005)
Fuel Return Line: Service and Repair
Fuel Hose/Pipes Replacement - Engine Compartment
FUEL HOSE/PIPES REPLACEMENT - ENGINE COMPARTMENT
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure.
3. Disconnect the engine fuel feed pipe from the chassis fuel flex hose.
4. Use a back up wrench on the fuel rail and disconnect the fuel feed pipe.
5. Remove the fuel feed pipe fastener located on the engine.
6. Remove the engine fuel feed pipe.
INSTALLATION PROCEDURE