Cobalt L4-2.0L SC VIN P (2005)
5. Using the SA9156E, or J 39765 (1), carefully rotate to fully secure the fuel pump module retaining lock ring.
IMPORTANT: Ensure that the fuel pump module retaining lock ring is fully seated within the fuel tank retaining tab slots.
6. Connect the fuel pump module harness electrical connector to the fuel tank pressure sensor.
7. Secure the fuel pump module electrical harness into the retaining slot on the tank.
8. Secure the retaining tab on the fuel tank retainer used to secure the fuel pump module pipes in position on the tank.
IMPORTANT: Ensure that the fuel tank rear shield is positioned properly on the pump module pipe retainer.
9. Install the fuel tank.
