Cobalt L4-2.0L SC VIN P (2005)
Steering Shaft: Service and Repair
Intermediate Steering Shaft Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting
2. Remove the left front tire.
3. Remove the intermediate shaft to steering gear pinch bolt. Discard the bolt.
4. Disconnect the intermediate shaft from the steering gear.
5. Lower the vehicle.
6. Align the steering wheel into the straight forward position.
7. Important: Locking of the steering column will prevent damage and a possible malfunction of the SIR system.
Remove the ignition key and turn the steering wheel clockwise until it locks.
8. Place scribe marks on the intermediate shaft to the steering column connection prior to removal.
