Cobalt L4-2.0L SC VIN P (2005)
Front Subframe: Service and Repair
Frame Replacement
Tools Required
*
J 24319-B Steering Linkage and Tie Rod Puller
*
J 43631 Ball Joint Remover
Removal Procedure
1. With the wheels in the straight ahead position, remove the key from the ignition switch.
2. Secure the cooling module to the upper body structure.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the front wheels from the vehicle.
5. Remove the left and right splash shields.
6. Remove the front transaxle mount to cradle through bolt.
