Cobalt L4-2.0L SC VIN P (2005)
Important: While installing, ensure that the clutch master cylinder pushrod is aligned with he clutch pedal.
1. Install the clutch master cylinder while rotating 1/4 turn counterclockwise.
2. Uncap the reservoir and hydraulic lines.
3. Connect the clutch line (2) to the clutch master cylinder.
4. Connect the clutch hose (1) to the clutch master cylinder.
5. Install the UBEC.
6. Connect the clutch master cylinder pushrod to the clutch pedal.
7. Install the clutch pedal retainer.
8. Bleed the clutch hydraulic system.
