Cobalt L4-2.0L SC VIN P (2005)
Shift Cable: Service and Repair
Getrag 5 Speed
Shift Cable Replacement
Removal Procedure
1. Apply the parking brake.
2. Shift the transmission to neutral (N).
3. Remove the console.
4. Lift up the cable retainers.
5. Disconnect cable ends from the shift control assembly, noting the location for assembly.
6. Disconnect the cable ends from the transmission shift levers, noting the location for assembly.
7. Remove the shift cable from the transmission cable bracket.
8. Raise and support the vehicle. Refer to Vehicle Lifting
9. Remove the shift cable attachment nut from the underbody.
10. Lower the vehicle.
11. Remove the left instrument panel closeout panel.
12. Position the drivers side front carpet aside.
