Cobalt L4-2.0L SC VIN P (2005)
Loosen the front transaxle mount thru bolt but do not remove the bolt.
5. Tighten the rear transmission mount thru bolt.
^
Tighten the thru bolt to 100 Nm (74 ft. lbs.).
6. Tighten the front transmission mount thru bolt.
^
Tighten the thru bolt to 100 Nm (74 ft. lbs.).
7. Lower the vehicle.
Transmission Mount Replacement - Left
Transmission Mount Replacement - Left
Removal Procedure
1. Remove the underhood electrical center bracket from the vehicle and reposition the electrical center.
