Cobalt L4-2.0L SC VIN P (2005)
Windshield Washer Reservoir: Service and Repair
WASHER SOLVENT CONTAINER REPLACEMENT
REMOVAL PROCEDURE
1. Drain the washer solvent from the washer solvent container.
2. Remove the front fender liner.
3. Disconnect the washer pump hose.
4. Disconnect the washer pump electrical connector.
5. Remove the washer solvent container screws.
6. Remove the washer solvent container from the left frame rail.
INSTALLATION PROCEDURE
1. Position the washer solvent container to the left frame rail.
2. Install the washer solvent container screw.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 10 N.m (89 lb in).
3. Connect the washer pump electrical connector.
4. Connect the washer pump hose.
5. Install the front fender liner.
6. Fill the washer solvent container with washer solvent.
