Cobalt L4-2.2L (2008)
Flywheel: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. Remove the transmission. Refer to Transmission Replacement for the manual transmission or Transmission Replacement for the automatic
transmission.
2. Remove the flywheel.
Installation Procedure
Notice: Refer to Fastener Notice .
1. Install the flywheel.
Tighten the flywheel bolts to 53 N.m (39 lb ft) plus 25 degrees.
2. Install the transmission. Refer to Transmission Replacement for the manual transmission or to Transmission Replacement for the automatic
transmission.