chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body - Interior Door Handle Clicking Noise/Inoperative|Page 14192 > < Body - Interior Door Handle Clicking Noise/Inoperative|Page 14190
Page 2
background image

3.

Remove the door pull cup and switch plate.

4.

Disconnect the electrical connectors.

5.

Install the beauty ring under the pull cup and switch plate.

6.

Install the electrical connectors.

7.

Install the switch plate into the door panel. Use a plastic trim tool and hold the trim down in front as shown in the illustration above.

8.

Install the two screws.

Tighten

Tighten the screw to 2 N.m (18 lb in).

9.

Install the plate in the bottom of the pull cup.

Body - Interior Door Handle Clicking Noise/Inoperative|Page 14192 > < Body - Interior Door Handle Clicking Noise/Inoperative|Page 14190