Cobalt L4-2.4L VIN B (2006)
13. Remove the LH door trim panel.
14. Peel back the door water deflector far enough to access the SIS - left.
15. Remove the CPA from the SIS connector.
16. Disconnect the SIS connector from the SIS - left.
ENABLING PROCEDURE
1. Remove the key from the ignition switch.
2. To enable the SIS - left, go to step 3. To enable the roof rail module - left, go to step 7, and to enable the seat belt retractor pretensioner - LF, go to
step 10.
3. Install the SIS - left connector to the SIS - left.
4. Install the CPA to the SIS connector.
5. Reinstall door water deflector.
6. Install the LH door trim panel.