Cobalt L4-2.4L VIN B (2006)
1. Synchronize the sunroof motor/actuator. Refer to Sunroof Motor Synchronization.
2. Install the sunroof motor/actuator to the sunroof module.
3. Install the sunroof motor/actuator bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 5 N.m (50 lb in).
4. Connect the electrical connector to the sunroof motor/actuator.
5. Secure the electrical harness to the sunroof module.
6. Verify the sunroof operation.
7. Install the headliner.