Cobalt L4-2.4L VIN B (2006)
Brake Shoe: Service and Repair
Brake Shoe Replacement
^
Tools Required
-
J 38400 Brake Shoe Spanner and Spring Remover
Caution: Refer to Brake Dust Caution in Service Precautions.
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake drum.
Notice: Do not over stretch the adjuster spring. Damage can occur if the spring is over stretched.
4. Remove the adjuster spring (1). Disengage the adjuster spring hook end from the tab on the adjuster actuator lever, then release the spring from the
brake shoe web hole.
5. Remove the adjuster actuator lever (1) from the pivot.