Cobalt L4-2.4L VIN B (2006)
7. Important: Ensure that the tips of the J 44217 are fully engaged into the timing chain.
Install one of the tools (1) from the J 44217 to the intake camshaft side of the timing chain assembly in order to retain the timing chain. Firmly
tighten the nuts.
8. Important: Ensure that the timing chain and the camshaft position actuators are marked for proper assembly.
Mark the intake and exhaust camshaft actuators and the respective locations on the timing chain.
9. Install a 24 mm wrench onto the hex on the camshaft in order to hold the camshaft.
10. Remove and discard the exhaust camshaft actuator bolt (2).
11. Remove the exhaust camshaft actuator (3) from the camshaft while also removing the actuator from the timing chain.
Installation Procedure