Cobalt L4-2.4L VIN B (2006)
20. Install the fixed timing chain guide and bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
21. Install the upper timing chain guide and bolts.
^
Tighten the bolts to 10 Nm (89 inch lbs.).
22. Install a 24 mm wrench onto the hex on the intake camshaft. Using a torque wrench, tighten the camshaft actuator bolt.
^
Tighten the bolt to 85 Nm (63 ft. lbs.), plus 30 degrees using the J 45059.
23. Install a 24 mm wrench onto the hex on the exhaust camshaft. Using a torque wrench, tighten the camshaft actuator bolt.
^
Tighten the bolt to 85 Nm (63 ft. lbs.), plus 30 degrees J 45059.