Cobalt L4-2.4L VIN B (2006)
18. Install new sealing washers on the condenser tube and evaporator hose fittings.
19. Install the condenser tube and evaporator hose to the TXV.
20. Install the TXV nut.
Tighten the nut to 20 N.m (15 lb ft).
21. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging.
22. Leak test the fittings using the J 39400-A.
23. Connect the negative battery cable.
24. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ)) Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5))
Draining and Filling Cooling System (GE 47716 Fill) in Cooling System.