Cobalt L4-2.4L VIN B (2006)
6. Reposition the heater inlet hose clamp at the engine using J 38185.
7. Remove the heater inlet hose from the engine.
INSTALLATION PROCEDURE
1. Install the heater inlet hose to the heater core.
2. Reposition the hose clamp to secure the hose using J 38185.
3. Install the heater inlet hose to the engine.
4. Reposition the hose clamp to secure the hose using J 38185.
5. Fill the cooling system. Refer to Draining and Filling Cooling System (2.0L (LSJ)) Draining and Filling Cooling System (2.2L (L61), 2.4L (LE5))
Draining and Filling Cooling System (GE 47716 Fill) in Cooling System.
6. Remove the drain pan from under the vehicle.