Cobalt L4-2.4L VIN B (2006)
Variable Induction Control Solenoid: Service and Repair
CAMSHAFT POSITION (CMP) ACTUATOR SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the camshaft cover.
2. Remove the exhaust (1) camshaft position (CMP) actuator solenoid valve bolt and valve, as required.
3. Remove the intake (2) CMP actuator solenoid valve bolt and valve, as required.
4. Inspect the solenoid valve O-ring seals from damage, replace as necessary.
INSTALLATION PROCEDURE
1. Lubricate the solenoid valve O-ring seals with clean engine oil.
NOTE: Refer to Fastener Notice.