Cobalt L4-2.4L VIN B (2006)
Transmission Position Switch/Sensor: Service and Repair
Park/Neutral Position (PNP) Switch Replacement
^
Tools Required
-
J 41545 Park/Neutral Switch Aligner
Removal Procedure
1. Apply the parking brake and place the control assembly in Neutral. The transaxle manual shaft must be in the Neutral position prior to installing
the range switch.
2. Remove the shift control cable from the transaxle range switch lever.
3. Disconnect the electrical connectors from the transaxle range switch.
4. Remove the transaxle range switch lever nut and lever.