Cobalt L4-2.4L VIN B (2006)
![background image](/chevrolet/cobalt/l4-2.4l_vin_b/Page-1629002.png)
Important: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery
cable to the battery terminal.
1. Position the negative battery cable (3) to the battery.
2. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the negative battery cable bolt (2).
^
Tighten the bolt to 17 Nm (13 ft. lbs.).
3. Install the rear compartment trim panel.
4. Reset the radio stations and the clock.