Cobalt L4-2.4L VIN B (2006)
2. Install the J 43482 in order to support the clutch cover to the flywheel assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch cover to flywheel bolts.
^
Follow the tightening sequence. Tighten the bolts to 24 Nm (18 ft. lbs.).
4. Remove the J 43482.
Important: Excessive amounts of lubricant on the input shaft splines may contaminate the clutch disc and cause clutch shudder.
5. Lubricate the inside diameter of the bearing with Saturn P/N 21005995, or equivalent.
6. Install the transmission.
7. Bleed the hydraulic system.
8. Connect the negative battery cable.