Colorado 2WD L4-2.8L VIN 8 (2004)
1. If the pad is being replaced, stick the adhesive-backed heating element (3) onto the pad (2), if equipped.
2. Install the cover (1) to the pad (2) with the hog rings (3).
3. Install the seat cushion foam pad and cover to the frame.
4. Install the seat belt buckle assembly (1) through the seat cushion pad.
NOTE: Refer to Fastener Notice in Service Precautions.
5. Install the seat belt buckle assembly (1) to the seat adjuster with the bolt (2).
Tighten