Colorado 2WD L4-2.8L VIN 8 (2004)
1. Align the front seat cushion outer trim panel to the seat assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 3 seat cushion outer trim panel mounting screws.
Tighten
Tighten the front seat cushion outer trim panel screws to 1.5 N.m (13 lb in).
3. Install the seat back recliner handle.
Front
SEAT CUSHION FRAME REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the cupholder from the seat by pulling it straight off the bracket.
3. Remove the front seat cushion outer trim panel.