Colorado 2WD L4-2.8L VIN 8 (2004)
18. Disconnect the wire harness for the lumbar and seat heat switches and pull the harness (2) back through the hole in the seat cushion frame.
19. Remove the 4 nuts (1) securing the seat cushion frame to the seat adjuster.
20. Remove the seat cushion frame.
INSTALLATION PROCEDURE
1. Install the seat cushion frame to the seat adjuster with 4 nuts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the front seat cushion frame mounting nuts to 24 N.m (18 lb ft).
2. Route the wire harness for the lumbar and seat heat switches through the hole in the seat cushion frame and connect the connectors.
3. Install the assist spring.