Colorado 2WD L4-2.8L VIN 8 (2004)
Oil Filter Adapter: Service and Repair
Oil Filter Adapter Replacement
Oil Filter Adapter Replacement
Removal Procedure
1. Remove the oil filter.
2. Disconnect the engine wiring harness electrical connector (2) from the oil pressure switch (1).
3. Disconnect the engine wiring harness retainer (3) from the oil filter adapter (4).
4. Remove the engine oil pressure switch if necessary.
5. Remove the oil filter adapter bolts.
6. Remove the oil filter adapter from the engine block.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.