Colorado 2WD L4-2.8L VIN 8 (2004)
![background image](/chevrolet/colorado_2wd/l4-2.8l_vin_8/Page-2175003.png)
2. Connect the roof rail module connector (1) and install the garnish molding.
3. Connect the seat belt pretensioner-left and install the CPA.
4. Install the trim panel.
5. Connect the side impact sensor yellow 2-way connector (5) located near the middle of the door.
6. Install the CPA (3) to the side impact sensor yellow 2-way connector (5) located near the middle of the door.
7. Install the left door trim panel.