Colorado 2WD L4-2.8L VIN 8 (2004)
8. Connect the internal wiring harness electrical connectors to the following components:
^
Transmission fluid pressure switch (1)
^
1-2 shift control solenoid (2)
^
2-3 shift control solenoid (3)
^
Pressure control solenoid (4)
^
TCC PWM solenoid (5)
^
3-2 control solenoid (6)
9. Install the 1-2 accumulator.
10. Connect the transmission harness 20-way connector to the transmission pass-through connector. Align the arrows on each half of the connector and
insert straight down.
11. Install the transmission filter and oil pan.