Colorado 2WD L4-2.8L VIN 8 (2004)
1. Install the switches (2, 5) to the switch plate (1).
2. Connect the electrical connectors (3, 4) to the switches (2, 5).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the switch plate assembly to the door trim panel with the 2 screws.
Tighten
Tighten the front door switch plate screws to 2 N.m (18 lb in).
Power Door Lock Switch Replacement - Rear
POWER DOOR LOCK SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE