Colorado 2WD L4-2.8L VIN 8 (2004)
1. Connect the lumbar switch harness (1) to the seat harness.
2. Install the lumbar switch (3) to the seat bezel. Verify that the retaining tabs (4) are fully seated.
3. Install the buttons on the switch.
4. Install the switch bezel assembly to the seat assembly.
5. Install the seat cushion outer trim panel.
Seat Switch Bezel Replacement
SEAT SWITCH BEZEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat cushion outer trim panel from the seat assembly.