Colorado 2WD L4-2.8L VIN 8 (2004)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
1. Remove the air cleaner assembly.
2. Remove the drive belt.
3. Remove the power steering pump pulley.
4. Disconnect the oil pressure sensor harness clip from the pump body.
5. Install a drain pan under the vehicle.
6. Disconnect the power steering pressure hoses from the power steering pump.
7. Remove the power steering pump mounting bolts.
8. Remove the power steering pump.
Installation Procedure