Colorado 2WD L4-2.8L VIN 8 (2004)
Suspension Travel Bumper: Service and Repair
Front Suspension
Spring Bumper Replacement (2WD)
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the jounce bumper mounting bolts.
3. Remove the jounce bumper.
Installation Procedure
1. Install the jounce bumper.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the jounce bumper bolts.
^
Tighten the bolt to 32 Nm (24 ft. lbs.).
3. Lower the vehicle.