Colorado 2WD L4-2.8L VIN 8 (2004)
15. RWD ONLY: Install the transmission fluid indicator stop bracket (1) and bolt (2).
^
Tighten the transmission fluid indicator stop bracket bolt to 11 Nm (97 inch lbs.).
16. Snap the wiring harness in place on the valve body bolts. Ensure the harness loom tab is located under the TFP switch.
17. Connect the internal wiring harness electrical connectors to the following components:
^
The TFP manual valve position switch (1)
^
The 1-2 shift solenoid (2)
^
The 2-3 shift solenoid (3)
^
The pressure control solenoid (4)
^
The TCC/PWM solenoid (5)
^
The 3-2 shift solenoid (6)
18. Install the transmission filter and oil pan.