Colorado 2WD L5-3.7L (2007)
-
Use J 24402-A, J 39032 or equivalent in order to remove the window.
12. Remove the bottom of the window from the urethane adhesive using a long utility knife or similar tool. Keep the cutting edge of the utility knife
against the glass.
13. With the aid of an assistant (2) remove the window (1) from the vehicle.
INSTALLATION PROCEDURE
1. Install a stationary window into the opening.
2. Install the window side reveal moldings to the vehicle.
3. Reposition the auxiliary weatherstrip (2) to the pinch-weld flange.
4. Install the cowl air inlet grille panel.
5. Install the window wiper arms.
6. Install the antenna mast.
7. Install the inside rear view mirror.
8. Close the hood.
9. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
Windshield Side Reveal Molding Replacement
WINDSHIELD SIDE REVEAL MOLDING REPLACEMENT
REMOVAL PROCEDURE
