Colorado 2WD V8-5.3L (2009)
7. Disconnect the digital receiver extension cable (1) from the receiver.
8. Remove the retainers (2) from the I/P.
9. Disconnect the electrical connector (3).
10. Remove the extension cable from the vehicle.
11. Detach the coax cable retainer (3) from the I/P.
12. Attach a mechanics wire to the end of the coax cable (2).
13. Detach the coax cable retainer (4) from the hinge pillar.
14. Grasp the cable (1) and pull upward to release the retainer from the hinge pillar.
15. Pull upward to remove the cable from behind the I/P.
16. Remove the cable from the vehicle leaving the mechanics wire behind the I/P.
Installation Procedure