Colorado 2WD V8-5.3L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 2 retaining screws in the switch plate. Tighten the front door switch plate screws to 2 Nm (18 lb in).
4. Install the retaining screw in the door handle bezel. Tighten the front door handle bezel screws to 2 Nm (18 lb in).
5. Install the window regulator handle from the door and insert the clip between the handle and the white plastic washer, if the vehicle is equipped
with manual windows.
6. Install the upper trim cover to the door.
