Colorado 2WD V8-5.3L (2009)
Note: Do not touch the adhesive backing on the decal.
3. Remove the backing from the front end of the decal.
4. Press the decal to the painted surface while continuing to remove the backing.
5. Hand roll the decal to the panel to ensure proper adhesion.
6. Inspect the decal for bonding.
7. Remove the tape from the area around the decal.
8. Install the tail lamp. Refer to Tail Lamp Replacement (See: Lighting and Horns/Tail Lamp/Service and Repair).
Radiator Grille Emblem/Nameplate Replacement
Radiator Grille Emblem/Nameplate Replacement
Removal Procedure
1. Remove the grille. Refer to Grille Replacement (See: Grille/Service and Repair).
2. Place the grille on a clean, prepared surface.
3. Remove the emblem retaining nuts.
4. Remove the emblem from the grille.
Installation Procedure
1. Install the emblem to the grille.
Notice: Refer to Fastener Notice .
2. Install the nuts that retain the emblem to the grille.
Tighten the nuts to 3 Nm (27 lb in).
3. Install the grille. Refer to Grille Replacement (See: Grille/Service and Repair).
