Colorado 2WD V8-5.3L (2009)
5. Grasp the lower edge of the body rear trim panel and pull to release the fasteners from the sheet metal.
6. Raise the panel to unhook it from the sheet metal along the lower edge of the rear window.
7. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
8. Remove the body rear trim panel from the vehicle.
Installation Procedure
1. Hook the body rear trim panel in the sheet metal along the lower edge of the rear window.
2. Install the panel by pushing firmly against the body to seat the panel fasteners.
3. Install the rear shoulder belt guide.
4. Install the jack and tool storage bracket. Refer to Jack and Tool Stowage Container Bracket Replacement (See: Jack/Service and Repair).
5. Install the folding seat. Refer to Folding Seat Replacement (Extended Cab) (See: Seats/Service and Repair/Folding Seat Replacement (Extended
Cab)).
6. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement (Extended Cab) (See: Seats/Seat Back/Service and Repair/Rear Seat
Back Cushion Replacement (Extended Cab))Rear Seat Back Cushion Replacement (Crew Cab) (See: Seats/Seat Back/Service and Repair/Rear
Seat Back Cushion Replacement (Crew Cab)).