Colorado 2WD V8-5.3L (2009)
1. Remove the lower body rear corner trim panel. Refer to Body Side Rear Lower Trim Panel Replacement (Regular Cab) (See: )Body Side Rear
Lower Trim Panel Replacement (Crew Cab) (See: )Body Side Rear Lower Trim Panel Replacement (Extended Cab) (See: ).
2. Remove the upper anchor bolt for the rear seat belt. Refer to Rear Seat Belt Replacement (See: Restraint Systems/Seat Belt Systems/Seat
Belt/Service and Repair/Rear Seat Belt Replacement).
3. Remove the seat belt adjuster knob.
4. Remove the trim plate.
5. Grasp the top of the upper body rear corner trim panel and gently pull the panel away from the body to release the fasteners.
6. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
7. Remove the upper body rear corner trim panel from the vehicle.
Installation Procedure
1. Position the upper body rear corner trim panel.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the upper body rear corner trim panel by pushing firmly against the body to seat the panel fasteners.
4. Install the trim plate.
5. Install the seat belt adjuster knob.
