Colorado 2WD V8-5.3L (2009)
Brake Caliper: Service and Repair
Brake Caliper Replacement
Brake Caliper Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning (See: Service Precautions/Technician Safety Information/Brake Dust Warning).
Warning: Refer to Brake Fluid Irritant Warning (See: Service Precautions/Technician Safety Information/Brake Fluid Irritant Warning).
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair)
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair
).
Note: Do not reuse the brake hose fitting gaskets.
3. Remove the brake hose fitting bolt (1), the brake hose fitting gaskets (2), and the brake hose fitting (3) from the brake caliper.
Cap the brake hose fitting to prevent brake fluid loss and contamination.
4. Discard the brake hose fitting gaskets.
