Colorado 2WD V8-5.3L (2009)
2. Install the wheel cylinder bolts (1) and tighten to 18 Nm (13 lb ft).
3. Connect the brake pipe fitting (1) to the wheel cylinder and tighten to 19 Nm (14 lb ft).
4. Install the rear brake shoes. Refer to Brake Shoe Replacement (See: Drum Brake System/Brake Shoe/Service and Repair).
5. Bleed the wheel cylinder. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic Brake
System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).