Colorado 2WD V8-5.3L (2009)
Installation Procedure
1. Install the radiator.
2. Install the condenser to the radiator.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the bolts retaining the condenser to the radiator and tighten to 28 Nm (21 lb ft).
4. Install the grille.
5. Install the radiator mount bracket.
6. Install the radiator mounting bracket bolt and tighten to 28 Nm (21 lb ft).
7. Raise the vehicle.
8. Install the radiator outlet hose (1) to the radiator.
9. Using J 38185 reposition the radiator outlet hose clamp (2) to the radiator.
10. Connect the transmission cooler lines to the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and
Connection (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Fluid Line/Hose/Service and Repair).
11. Lower the vehicle.
12. Install the radiator vent inlet hose to the radiator.
13. Install the fan shroud. Refer to Engine Coolant Fan Shroud Replacement (LLV, LLR) (See: Fan Shroud/Service and Repair)Engine Coolant Fan
Shroud Replacement (LH8) (See: Fan Shroud/Service and Repair).