Colorado 2WD V8-5.3L (2009)
1. Install the coolant heater cord to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Position the coolant heater cord clip to the frame and install the coolant heater cord bolt. Tighten the bolt to 8 Nm (71 lb in).
3. Raise the vehicle.
4. Install the coolant heater cord clip to the power steering gear outlet hose.
5. Install the coolant heater cord clip to the engine harness channel.
6. Connect the coolant heater cord electrical connector.
7. Lower the vehicle.
