Colorado 2WD V8-5.3L (2009)
1. Tighten the bolts a first pass to 15 Nm (11 lb ft).
2. Tighten the bolts a final pass to 30 Nm (22 lb ft).
3. Position and install the heater inlet hose (5) to the water pump.
4. Position the heater inlet hose clamp (4) at the water pump.
5. Position and install the radiator surge tank outlet hose (3) to the water pump.
6. Position the radiator surge tank outlet hose clamp (1) at the water pump (2).
7. Position and install the radiator outlet hose (2) to the water pump.
8. Position the radiator outlet hose clamp (1) at the water pump.
9. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory (See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Drive Belt Replacement - Accessory).
