Colorado 2WD V8-5.3L (2009)
Drive Belt: Service and Repair
Drive Belt Replacement - Accessory
Drive Belt Replacement - Accessory
Removal Procedure
1. Open the hood.
2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Filters/Air Cleaner Housing/Air Cleaner Fresh
Air Duct/Hose/Service and Repair).
3. Install a breaker bar with hex-head socket to the drive belt tensioner bolt.
4. Rotate the drive belt tensioner clockwise in order to relieve tension on the belt.
5. Remove the drive belt (1) from the pulleys and the drive belt tensioner.
6. Slowly release the tension on the drive belt tensioner.
7. Remove the breaker bar and socket and from the drive belt tensioner bolt.
8. Clean and inspect the belt surfaces of all the pulleys.
Installation Procedure
