Colorado 2WD V8-5.3L (2009)
13. Disconnect the engine wiring harness electrical connectors (3) from the fuel injectors.
14. Remove the engine wiring harness bracket nut (1).
15. Remove the engine wiring harness bracket (2) from the stud and reposition the harness as needed.
16. Remove the EVAP canister purge solenoid valve. Refer to Evaporative Emission Canister Purge Solenoid Valve Replacement (See: Emission
Control Systems/Evaporative Emissions System/Canister Purge Solenoid/Service and Repair).
17. Disconnect the chassis fuel feed line quick connect fitting (2) from the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel
Line Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
