Colorado 2WD V8-5.3L (2009)
7. Connect the chassis fuel feed line quick connect fitting (2) to the fuel rail. Refer to Metal Collar Quick Connect Fitting Service (See: Fuel Line
Coupler/Service and Repair/Metal Collar Quick Connect Fitting Service).
8. Install the EVAP canister purge solenoid valve. Refer to Evaporative Emission Canister Purge Solenoid Valve Replacement (See: Emission
Control Systems/Evaporative Emissions System/Canister Purge Solenoid/Service and Repair).
9. Position the engine wiring harness as needed, and install the engine wiring harness bracket (2) to the stud.
10. Install the engine wiring harness bracket nut (1) and tighten to 9 Nm (80 lb in).
11. Connect the engine wiring harness electrical connectors (3) to the fuel injectors.