Colorado 2WD V8-5.3L (2009)
Fitting Service (See: Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service).
8. Separate the fuel fill hose from the fuel tank.
9. Remove the fuel fill hose screws.
10. Remove the fuel fill hose from the vehicle.
11. Cap the open end of the fuel tank in order to prevent system contamination.
Installation Procedure
1. Uncap the fuel tank.
2. Position the fuel fill hose to the fender.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the fuel fill hose screws and tighten to 2 Nm (18 lb in).
